RTS Consulting Inc


Stanford Brown founder of Raising the Standard Consulting USA Inc. is an authorized trainer of the 10 and 30 hour construction industry outreach courses.

AN ENJOYABLE EXPERIENCE

Emphasis. The classes are designed to be presented to workers. They emphasize hazard identification, avoidance, control and prevention, not OSHA standards and regulatory codes. The presentations are tailored to the needs and understanding of the audience. Each class is evaluated to determine the best methods of training before the class begins.

Site-Specific Training. We believe that the most rewarding classes for students are the ones they can relate to because the trainer uses examples, pictures, and scenarios that come from the student’s work place, industry or community.

Homogenous Class. The ideal class to teach is one where students have similar positions and needs. We endeavor to conduct separate training classes for supervisors, managers, and workers as much as possible unless a combined session would assist the students in fostering a culture of teamwork. We also try to separate workers into like groups, for example, office personnel, machine operators, and maintenance staff when possible.

Training Purpose. We explain up front, that the training isn’t a bureaucratic exercise. We emphasize that it may save a life and help them continue to provide for their family. We explain that safety and health add value to the company, the workplace and their life.

Use Objectives. At the beginning of each session we describe the skills and abilities the students should have or exhibit for each topic and relate the objectives to the students’ work, whenever possible.

Presentation Assortment. Students learn in different manners, and get tired of one training style. Therefore we use different trainers, computer presentations, videos, case studies, exercises and graphics to make the course interesting and enjoyable. By doing this we employ the three levels of training techniques - presentation (presenting the material in a variety of ways), discussion (getting the students involved in the learning), and performance (students practice the material they learned).

Testing. We use quizzes and tests to ensure the student understands key objectives. We also provide students feedback on incorrect answers in an open discussion format.

Evaluations. Students will have the opportunity to evaluate our classes. This feedback will help us determine whether the course is accomplishing its goals and provide input we can use to improve the training.

10-HOUR CONSTRUCTION INDUSTRY OUTREACH TRAINING PROGRAM

The 10-hour program is intended to provide a variety of training on Construction safety and health to entry level workers. The 10-hour classes are designed to be presented to workers, therefore they emphasize hazard identification, avoidance, control and prevention, not OSHA standards.

The 10-hour course will include at least the following:

  1. Introduction to OSHA, including:
    a.OSH Act/General Duty Clause 5(a)(1)
    b.Subpart C: General Safety and Health Provisions, Competent Person,
    c.Recordkeeping (CFR Part1904)
  2. Electrical, Subpart K
  3. Fall Protection, Subpart M
  4. Personal Protective and Lifesaving
  5. Equipment, Subpart E
  6. Materials Handling, Storage, Use and Disposal, Subpart H
  7. Tools - Hand and Power, Subpart I
  8. Scaffolds, Subpart L
  9. Cranes, Derricks, Hoists, Elevators, and Conveyors, Subpart N
  10. Excavations, Subpart P
  11. Stairways and Ladders, Subpart X
  12. Any other construction industry standards or policies deemed necessary after the pre-course evaluation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30-HOUR CONSTRUCTION INDUSTRY OUTREACH TRAINING PROGRAM

The 30-hour program is intended to provide a variety of training to people with some safety responsibility.

  1. Introduction to OSHA Standards
    a.OSH Act/General Duty Clause 5 (a) (1)
    b.29 CFR 1904, Recordkeeping
    c.Subpart C: General Safety and Health Provisions, Competent Person
    d.STD 3-1.1, "Clarification of Citation Policy Regarding 29 CFR 1926.20, 29 CFR 1926.21 and Related General Safety and Health Provisions"; Safety Programs
  2. Electrical, Subpart K
  3. Fall Protection, Subpart M
  4. Occupational Health and Environmental Controls (emphasis on Hazard Communication), Subpart D
  5. Health Hazards in Construction, Subpart D
  6. Personal Protective and Lifesaving Equipment, Subpart E
  7. Fire Protection and Prevention, Subpart F
  8. Materials Handling, Storage, Use and Disposal, Subpart H
  9. Tools - Hand and Power, Subpart I
  10. Welding and Cutting, Subpart J
  11. Scaffolds, Subpart L
  12. Cranes, Derricks, Hoists, Elevators, and Conveyors, Subpart N
  13. Motor Vehicles, Mechanized Equipment and Marine Operations; Rollover Protective Structures and Overhead Protection; and Signs, Signals and Barricades, Subparts O, W and G
  14. Excavations, Subpart P
  15. Concrete and Masonry Construction, Subpart Q
  16. Steel Erection, Subpart R
  17. Stairways and Ladders, Subpart X
  18. Confined Space Entry
  19. Any other construction industry standards or policies deemed necessary after the pre-course evaluation

Powered by 360training

Customer support number (1-800-442-1149)

Online OSHA outreach trainer information:
(Michael Millsap, outreach-trainer@360training.com )





RTS Consulting Inc
 
Character and Integrity Training
Construction Safety Services
Continuous Improvement / Maintenance Program
Construction Health and Safety Technician (CHST) Prep Course
Emergency Disaster
Environmental Management Systems
Ergonomics
First Aid/CPR/AED Train-the-Trainer
GHS Registration Form
Growing a Green Economy
Hazard Identification and Control
OSHA 10 Hr Construction Course
OSHA 30 Hr Construction Course
OSHA 10 Hr General Industry Course
OSHA 30 Hr General industry Course
Pandemic Planning
Public Safety Training
Public OSHA 10 HR - Registration
Public OSHA 30 HR - Registration
Quantitative / Analytical Services
RTS - USA Brochure
Safety Trained Supervisor (STS) in Construction
Safety Training Courses
Safety Services
Sustainable development
Supervisor Safety Training
So You're Getting Inspected by OSHA???
10 and 30 Hour Construction Industry Outreach Courses
Training & Program Development
Training Schedule 2014
Useful Links
Web Based Safety Training
 

    Click here to view our contact details
   
Web design by TechSpeed